|
Post by micro on Jul 19, 2018 8:55:14 GMT -5
This is not the one that I started with, but it is similar.
|
|
|
Post by micro on Jul 19, 2018 8:56:45 GMT -5
|
|
|
Post by Chuy on Jul 19, 2018 9:46:24 GMT -5
LOL, had to show up Professor Moriarty huh? Look at the plaque on that tooth, they don't floss
|
|
|
Post by Chuy on Jul 19, 2018 9:46:52 GMT -5
That things looks effin awesome. What did you use?
|
|
|
Post by Chuy on Jul 19, 2018 9:48:31 GMT -5
Are there witness holes on the bottom to help push out the axles? I can imagine that they would be a bear to remove without.
|
|
|
Post by Professor Moriarty on Jul 19, 2018 10:48:04 GMT -5
Oh snap!
Talk about Wonder Woman’s invisible jet!
|
|
|
Post by micro on Jul 19, 2018 11:04:07 GMT -5
That things looks effin awesome. What did you use? elbow grease. Wet dry sandpaper and then micromesh and a final high shine on the buffing wheel. Getting the inside of the wheel well I used some dental composite polishers followed by a mini rag wheel.
|
|
|
Post by micro on Jul 19, 2018 11:05:00 GMT -5
Are there witness holes on the bottom to help push out the axles? I can imagine that they would be a bear to remove without. There is a small hole on one side. I am not sure you need that, but feel free to add once you get it.
|
|
|
Post by Professor Moriarty on Jul 19, 2018 11:06:17 GMT -5
Yo! I’m gunna polish this one up and send it into Nipwordle next month. We should get a posse of them to race!
|
|
|
Post by micro on Jul 19, 2018 11:09:29 GMT -5
Looks like you are getting better at machining the inside (body) of the wheel well.
|
|
|
Post by Chuy on Jul 19, 2018 11:22:12 GMT -5
You definitely have some polishing skills. I wish my aluminum bars looked like that.
|
|
|
Post by micro on Jul 19, 2018 11:27:37 GMT -5
You definitely have some polishing skills. I wish my aluminum bars looked like that. Huh? Clear aluminum?
|
|
|
Post by Vitamin K on Jul 19, 2018 11:57:33 GMT -5
You definitely have some polishing skills. I wish my aluminum bars looked like that. Huh? Clear aluminum?
|
|
|
Post by Professor Moriarty on Jul 19, 2018 12:53:57 GMT -5
Looks like you are getting better at machining the inside (body) of the wheel well. Yep... drilled holes and all... it was almost the last little bits when... I broke an endmill worth a burger and a half. Been sanding this thing thing for about an hour and already I am about to ask if I can borrow Chuy’s Desert Eagle.
|
|
|
Post by Professor Moriarty on Jul 19, 2018 17:36:22 GMT -5
Yeah Micro,
How did you do it?
|
|