|
|
Post by Professor Moriarty on Mar 3, 2017 2:09:07 GMT -5
No... That won't do... The logo should be: The all seeing eye making up the "Golden Triangle" of a derby car. Granted it will need to be in forced perspective so it will read as less skewed... but still... Did you know that Pythagoras was a member of the Illuminati (which translates to "the illuminated ones")  |
|
|
|
Post by Professor Moriarty on Mar 3, 2017 3:57:46 GMT -5
|
|
|
|
Post by puftime on Mar 3, 2017 7:00:47 GMT -5
New member of he forum, and newer PWD fanatic that's been obsessively studying the sport for a while. Saw a post in FB, and had to come see what the fuss was about. Glad I did cause these new jigs look impressive!
Also...I never thought of holding the body with a .89 drill blank while drilling the other side. That's brilliant!
|
|
|
|
Post by Vitamin K on Mar 3, 2017 8:17:26 GMT -5
No... That won't do... The logo should be: The all seeing eye making up the "Golden Triangle" of a derby car. Granted it will need to be in forced perspective so it will read as less skewed... but still... Did you know that Pythagoras was a member of the Illuminati (which translates to "the illuminated ones") By "The Golden Triangle" do you mean the lines between the two rear axles and the DFW axle? |
|
|
|
Post by micro on Mar 3, 2017 8:21:26 GMT -5
By "The Golden Triangle" do you mean the lines between the two rear axles and the DFW axle? That answer is yes. |
|
|
|
Post by Vitamin K on Mar 3, 2017 8:45:11 GMT -5
That's a pretty slick ad. Hope MB didn't puke so many times in production of the jig, though.  |
|
|
|
Post by Vitamin K on Mar 3, 2017 9:47:36 GMT -5
By "The Golden Triangle" do you mean the lines between the two rear axles and the DFW axle? That answer is yes. Something like this as a starter? Obviously, the space needs to be better utilized...  |
|
|
|
Post by Crash Enburn on Mar 3, 2017 11:41:00 GMT -5
Ohmigosh!!! That was wicked awesome! Nutmegged by Rooney. Left in a heap by Ronaldo. "A Renault LeCar?? Nah, this is a proper footballer's car!" |
|
|
|
Post by Professor Moriarty on Mar 7, 2017 1:23:23 GMT -5
Does anyone here know how to bump a post... without doing it the old fashioned way?
|
|
|
|
Post by The Zeebzob on Mar 7, 2017 6:25:41 GMT -5
Does anyone here know how to bump a post... without doing it the old fashioned way? You have to start in the category so you can see all the threads within it:  |
|
|
|
Post by Professor Moriarty on Mar 7, 2017 17:35:25 GMT -5
Thanks for the arrows Andy! link |
|
|
|
Post by Crash Enburn on Mar 10, 2017 11:19:45 GMT -5
Back to the subject at hand... Microbrush's (Lucitifer's™) jig.
I have not drilled with it yet, but the jig itself is a thing of beauty. Once piece with easily seen sightline markings. It looks like the holes are drilling in 1/8" from the bottom (did not actually measure, just eyeballed it).
If this does indeed work anywhere near as good as it looks, I just scored the deal of the century!
Thank you, Micro!
|
|
|
|
Post by ccw13175 on Mar 10, 2017 12:25:56 GMT -5
Back to the subject at hand... Microbrush's (Lucitifer's™) jig. I have not drilled with it yet, but the jig itself is a thing of beauty. Once piece with easily seen sightline markings. It looks like the holes are drilling in 1/8" from the bottom (did not actually measure, just eyeballed it). If this does indeed work anywhere near as good as it looks, I just scored the deal of the century! Thank you, Micro! It is the best jig around. And Microbrush is definitely a stand up guy for going out and designing something like this and selling to help people not necessarily make a ton of money off of each one |
|
|
|
Post by Professor Moriarty on Mar 10, 2017 22:40:17 GMT -5
I am curious about this Lucitifer name... is this a mix of Lucite and Lucifer? This jig is a beauty... I got mine yesterday and I am floored by the attention to detail. The edges of this plastic are sharp and polished! Usually in the polishing process the edges get rounded a bit and often it is preferred... It is more trouble to get the polished acrylic to be so sharp... He really put the effort into this jig... it is top notch on every level.  |
|
|
|
Post by Crash Enburn on Mar 10, 2017 22:59:54 GMT -5
That is the source of the name. It came out in discussion of possible company names for this excellent jig. Intended as a joke, and Micro gave it a quasi-approval. Now, though, I'm second guessing myself for suggesting it. I mean, that is a fairly negative, evil name for an awesome product from a stand-up guy.
Let me think of other company names...
|
|
