Can someone please post the rules for them here?
Car Body/Dimensions
Wheel Base: Any
Height: 3" inches Maximum
Length: 4" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 143 grams Maximum
3 axles & wheels must be installed on the side of the car body
Peg/Guide Pin can be used instead of 4th wheel
Additional materials maybe added, as long as they meet the rules
Other types of materials may be used to construct your body and/or frame
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Custom Machined,Maximum Velocity, Awana, Pinecar
The tread surface must remain flat, and parallel to the bore
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheels can be trued to 2.0 gram
Wheels cannot be intentionally machined below 2.0 gram then add foreign material to bring back to weight
Top 3 cars and 2 random cars maybe checked after the race
Axles
Minimum Diameter .084
Nail, Pin, Headless, Straight
Lubricants
Any
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
"
